SNAPTAIN H823H Mini Drone
Fly for Fun
3D Flip and 360° Rotation
3 Speed Modes
Altitude Hold Mode
Headless mode
One Key Return
Pocket Size
Flip & Roll Air Show
Wanna experience a stunning Flip & Roll air show?Press the right joystick vertically then push it on any side, H823H will show you what it can do!
Fly at Your Own Pace
Maybe you are still an amateur? No worries! Take your time and fly at your own pace with its 3-speed mode!
Hover Freely, Fly Still
Automatically hovering at a certain height while setting your hands free from the controller!
Always Under Your Control
Just orient the quadcopter's flight on the controller and everything is under control!
Call Me Back
Simply press One Key Return button to call me back! Don't have to worry about losing me.
Mini Size, Great Pleasure
With its portable size, you can enjoy great time with H823H anywhere, anytime!
Specifications
The LED doesn't turn on after the battery is installed.
*Make sure the power switch on and the drone is turned to ON.
*Make sure there is enough power in the drone battery.
*Make sure the connectors of the battery are plugged in firmly.
The drone LED keeps flashing and the control input is unresponsive after switching on the drone and remote.
*There is no connection between the drone and remote. Pair them again as instructed.
The motors don't respond to the control stick and the LED on the drone flashes.
*Charge the battery or replace it with a fully charged battery of the drone.
*Make sure the batteries of the remote have enough power.
The flight is not stable.
*Return the drone and restart to do a flight calibration as instructed.
*Fly the drone when the weather is good.
The response from the drone to the control is not sensitive.
*Make sure the distance between the drone and the remote is effective.
The drone will fly beyond the control range.
*Activate the Headless Mode, then move the Right Control Stick to fly the drone back.
After a crash, the drone keeps acsending or pitching when flying again.
*Pull the Left Control Stick backward to the bottom to land the drone, and hold it for 3s at least until all the rotor blades stop rotating. Please check if the blades reach the top of Propeller Guard after landing. If yes, please press down the center part of the Propeller Guard to adjust the blades. Then calibrate the drone again.
Snaptain SP500
Snaptain SP510
Snaptain SP650
Snaptain SP700
Snaptain A15H
Snaptain S5C
Snaptain H823H(Blue)
Snaptain SP300
Snaptain H823H(Red)
Snaptain SP350
Snaptain SP330
Snaptain Battery and USB Charging Cable for Snaptian P30
Snaptain Propellers, Screws and Screwdriver for Snaptian P30
